หน้าหลัก
ทำเนียบผู้ประกอบการ
ข้อมูลงานวิจัย
งานวิจัยจากส่วนกลาง
งานวิจัยส่วนภูมิภาค
เทคโนโลยีที่ใช้ในการผลิต
งานวิจัย กลุ่มอุตสาหกรรมพลาสติกชีวภาพ (Bioplastics)
Home
Bio-Plastics
งานวิจัย กลุ่มอุตสาหกรรมพลาสติกชีวภาพ
read
ข้อมูลงานวิจัยอุตสาหกรรมพลาสติกชีวภาพ (Bioplastics Research)
ประเภทงานวิจัย :
งานวิจัยส่วนท้องถิ่น
ประเภทงานอุตสาหกรรม :
อุตสาหกรรมพลาสติกชีวภาพ (Bioplastics)
ผู้แต่ง :
สุทธิษา ก้อนเรือง การะเกด แก้วใหญ่ ธวัฒน์ชัย เทพนวล มาริสา เชษฐวรรณสิทธิ์
ชื่อเรื่อง (TH) :
การผลิตพลาสติกที่ย่อยสลายได้ทางชีวภาพจากเส้นใยต้นสาคู
ชื่อเรื่อง (EN) :
Sustainable Bioplastics From Land and Sea Waste: Structure, Thermal Stability, and Mechanical Behavi
บทคัดย่อ (TH) :
ปัจจุบันมีการใช้ว้สดุพอลิเมอร์อย่างกว้างขวางเนื่องจากมีสมบััติที่ดีหลายประการ เช่น น้ำหนักเบา ความแข็งแรงสูงและทนต่อสารเคมี อย่างไรก็ตามพอลิเมอร์เหล่านี้ก่อให้เกิดปัญหาด้านสิ่งแวดล้อมเพราะส่วนใหญ่เป็นพอลิเมอร์สังเคราะห์ที่ไม่สามารถย่อยสลายทางชีวภาพได้ดังน้้น โครงงานวิจัยนี้มีวัตถุประสงค์ เพื่อศึกษาการผลิตและสมบัติของพลาสติกย่อยสลายได้ทางชีวภาพจากเส้นใยต้นสาคูโดยใช้แป้งมันสำปะหลังเป็นตัวประสาน ตัวอย่างถูกเตรียมโดยวิธีการอัดขึ้นรูปที่อุณหภูมิ 150 °C ความดัน 500 psi ใช้เวลาในการอัด 15 นาที อัตราส่วนของเส้นใยต้นสาคูต่อตัวประสาน 1:1 6:4 7:3 8:2 9:1 และ 1:0 โดยน้ำหนัก เมื่อทดสอบสมบัติเชิงกลและสมบัติทางกายภาพ พบว่าเมื่อปริมาณเส้นใยเพิ่มขึ้นความหนาแน่นและความต้านทานแรงดึงของตัวอย่างลดลง ที่อัตราส่วนเส้นใยต่อน้ำ แป้งมันสำปะหลังเป็น 1:1 ความต้านทานแรงดึงมีค่าสูงสุดคือ 4.24 ± 0.92 MPa ในทางตรงกันข้ามการดูดซึมน้ำ มีค่าเพ่ิ่มขึ้นเนื่องจากเส้นใยทำให้เกิดช่องว่างในตัวอย่าง ขณะที่ความแข็ง มีค่าใกล้เคียงกันและจากการทดสอบการย่อยสลายของพลาสติกชีวภาพด้วยวิธีการฝังกลบดินเป็นเวลา 28 วัน พบว่า ตัวอย่างที่เตรียมจากอัตราส่วนของเส้นใยต่อตัวประสานเป็น 1:0 โดยน้ำหนักมีความสามารถในการย่อยสลายสูงสุด จากการศึกษาสรุปได้ว่า เส้นใยสาคูสามารถนำมาใช้เตรียมพลาสติกย่อยสลายได้ทางชีวภาพสำหรับการประยุกต์ใช้ในอนาคตได้
บทคัดย่อ (EN) :
Nowadays, polymeric materials have been widely used due to their advantage properties such as lightweight, high strength, and chemical resistance. However, the polymers cause environmental pollution problem because most of them are non-biodegradable. Therefore, this research purposed to investigate the production and properties of biodegradable plastic produced from sago fibers using the commercial cassava starch as a binder. The biodegradable plastic was produced by hot compression process at temperature of 150 °C with 500 psi pressure and holding for 15 min. The ratios between sago fibers and the binder were 1:1, 6:4, 7:3, 8:2, 9:1, and 1:0 by weight. The mechanical and physical properties of all samples were characterized. The results indicated that the fiber content increase, density and tensile strength decreased. The sago fibers to binder at the ratio of 1:1 by weight showed the optimum tensile strength of 4.24 ± 0.92 MPa. In contrast, water absorption of the fibers increased due to the fiber created the voids in the samples, while the hardness of all samples were similar. In addition, the samples were in landfills for 28 days in order to biodegradability test. The sample prepared form sago fibers to binder ratio of 1:0 by weight exhibited the highest degradability. From the study, it can be concluded that sago fibers can be prepared as biodegradable plastic for the future application.
คำสำคัญ (TH) :
พลาสติกย่อยสลายได้ทางชีวภาพ; วิธีการอัดขึ้นรูป; เส้นใยสาคู; แป้งมันสำปะหลัง
คำสำคัญ (EN) :
Biodegradable Plastic, Compression Process, Sago Fibers, Cassava Starch
ปีที่พิมพ์ :
2020
URL :
อ่านฉบับเต็มได้ที่นี่ >>> Click
<<<